ENGLISH
Remote Control Unit Part Names and Functions
MD operation buttons
1(play) button
Press this button to start playback.
2(stop) button
Press this button to stop playback.
8and 9 (automatic search buttons) Use these buttons to search for the beginning of the desired track.
POWER operation switch
Cassette deck operation buttons
2(stop) button
Press this button to stop the tape.
1(forward play) button Press this to start playback or recording in the forward direction.
0(reverse play) button Press this to start playback or recording in the reverse direction.
CD player operation buttons
DIRECT button
Press this button for direct search on the CD player.
6and 7
(manual search) buttons
Press these buttons during playback to move quickly forward or backward.
REPEAT button
Press this button for repeat playback.
Use this switch to turn on the power of the entire system or set the power to the standby mode.
SLEEP button
Press this button to set the sleep timer.
POWER | 8 | 9 | 2 | 1 |
SLEEP |
|
| RESET REC / MUTE | |
|
| DECK |
|
|
6 | 7 | 2 | 0 | 1 |
EDIT | RANDOM REPEAT | 8 | 9 | |
CD operation buttons
2(stop) button
Press this button to stop playback.
1(play) button
Press this button to start playback.
8and 9
(automatic search buttons)
Use these buttons to search for the beginning of the desired track.
Cassette deck operation buttons
•REC/REC MUTE button
To start recording from the stop mode, press this button, then press 1.
When this button is pressed during the recording, a blank section of approximately
5 seconds is created, after which the recording standby mode is set.
POWER | 8 | 9 | 2 | 1 |
SLEEP |
|
| RESET REC / MUTE | |
|
| DECK |
|
|
6 | 7 | 2 | 0 | 1 |
EDIT | RANDOM REPEAT | 8 | 9 | |
RANDOM button
Press this button to play the tracks in random order.
PROGRAM button
Press this button for programmed playback on the CD player.
CANCEL button
Press this button to clear the last track from the program.
TIME/SIDE A/B button
Number buttons
Press these buttons after pressing the TUNER button to recall preset stations.
When playing a CD, press these buttons after pressing the DIRECT or PROGRAM button to specify the desired track.
PRESET buttons
Use these buttons to recall preset stations on the tuner.
When the PRESET UP or DOWN button on the remote control unit is pressed while in the standby mode, the power turns on and the receiver begins operating.
BAND (AM/FM) selector button TUNING buttons
MEMO button
TIME | 6 7 | 2 1 |
SIDE A/B |
PROGRAM CANCEL DIRECT TUNER FUNCTION
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 |
PRESET |
| MEMO |
| +10 |
TUNING |
| BAND |
|
|
VOLUME
B
REMOTE CONTROL UNIT
FUNCTION selector button
Press this button to switch the input (function).
The input changes in the followingorder each time this button is pressed: CD, TAPE, TUNER, PHONO, MD, AUX.
TUNER button
Press this button to switch the function to the tuner and to recall preset stations from the remote control unit using the number buttons.
VOLUME buttons
Use these to adjust the volume. The volume increases when the • button is pressed and decreases when the ª button is pressed.
6(rewind) button
Press this button to rewind the tape.
Press this button during playback to set the music search mode (to find the beginning of selections).
7
Press this button during playback to set the music search mode (to find the beginning of selections).
RESET button
Press this button to reset the tape
counter to ” 
“.
TIME | 6 7 | 2 1 |
SIDE A/B |
PROGRAM CANCEL DIRECT TUNER FUNCTION
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 |
PRESET |
| MEMO |
| +10 |
TUNING |
| BAND |
|
|
VOLUME
B
REMOTE CONTROL UNIT
•TIME
Press this button during the play or pause mode to switch the time display.
Normally the elapsed time for the track currently playing is displayed. When this button is pressed, the display switches to the remaining time for that track, the total remaining time on the disc, then back to the elapsed time per track.
During programmed playback, the total remaining time display indicates the total remaining time of the programmed tracks.
10
