About the controls on the air conditioner

Additional important information.

Air Direction

Use the lever to adjust the air direction left and right only..

Care and cleaning of the air conditioner.

Grille and Case

Turn the air conditioner off and remove the plug from the wall outlet before cleaning..

To clean, use water and a mild detergent.. Do not use bleach or abrasives..

Air Filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or

more often if necessary..

To remove:

Open the inlet grille by pulling downward on the tabs at the top upper corners of the inlet grille until the grille is in a 45º position.. Remove the filter..

Clean the filter with warm, soapy water.. Rinse and let the filter dry before replacing it.. Do not clean the filter in a dishwasher..

CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

Tab

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly.. If they are clogged with dirt or soot, they may be professionally cleaned..

How to Insert the Batteries in the Remote Control

1

2

3

Remove the battery cover by sliding it according to the arrow direction..

Insert new batteries, making sure that the (+) and (–) of battery are installed correctly..

Reattach the cover by sliding it back into position..

NOTES:

nUse 2 “AAA” (1..5 volt) alkaline batteries.. Do not use rechargeable batteries..

nRemove the batteries from the remote control if the system is not going to be used for a long time..

nDo not mix old and new batteries.. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc) batteries..

6

Page 6
Image 6
GE AEQ2, AEM2 installation instructions Care and cleaning of the air conditioner

AEM2, AEQ2 specifications

General Electric (GE) has long been recognized as a leader in manufacturing advanced electrical equipment, and among its standout products are the AEQ2 and AEM2 circuit breakers. Both devices integrate cutting-edge technologies and feature sets that cater to the evolving demands of modern electrical systems.

The AEQ2, renowned for its compact design, combines reliability with high performance. One of its primary features is the application of state-of-the-art electronic trip units, which provide precise overload and short-circuit protection. This technology ensures that the circuit breaker can swiftly detect faults and interrupt power to prevent damage to downstream equipment. Additionally, the AEQ2 is equipped with advanced communication capabilities, allowing for seamless integration into supervisory control and data acquisition (SCADA) systems. This level of connectivity facilitates real-time monitoring and data analysis, enhancing operational efficiency and reliability.

On the other hand, the AEM2 circuit breaker represents another leap forward in smart electrical distribution. Its design focuses on energy efficiency and sustainability. The AEM2 incorporates energy metering capabilities, enabling users to monitor their power consumption accurately. Furthermore, this breaker features a modular architecture, permitting customized configurations to meet specific application needs. The selective coordination capabilities of the AEM2 ensure that only the affected section of a system is de-energized during fault conditions, maintaining power to critical loads and minimizing disruptions.

Both circuit breakers utilize GE’s advanced arc-extinguishing technology, which promotes safety and longevity. This technology helps to extinguish arcs more effectively during fault conditions, thus increasing the overall lifespan of the breaker. The AEQ2 and AEM2 are designed to operate efficiently in various environments, boasting a high ingress protection rating that allows them to function optimally in harsh conditions.

Another notable aspect of these devices is their eco-friendly design, as they utilize materials and technologies aimed at reducing their overall environmental impact. With a focus on compliance with international standards, both the AEQ2 and AEM2 are tested for safety and performance in diverse applications.

In summary, GE's AEQ2 and AEM2 are exemplary circuit breakers that combine modern technology, energy efficiency, and robust design features. Their advanced protection mechanisms, communication capabilities, and sustainable design make them suitable choices for today’s demanding electrical infrastructure. As industries continue to evolve, the need for reliable and intelligent electrical equipment like the AEQ2 and AEM2 becomes ever more crucial, reinforcing GE’s position at the forefront of electrical innovation.