Installation Instructions

INSTALLING A J-MODEL IN AN EXISTING WALL CASE

Read these instructions completely and carefully.

1REMOVE LOCKING PLATE ON FRONT LEFT SIDE

Locking

plate

Remove

screw

2REMOVE ALL SHIPPING PADS(IF PRESENT) INSIDE AIR CONDITIONER NEXT TO COMPRESSOR
4REINSTALL LOCKING PLATE WITH TAB BEHIND WALL CASE FLANGE. TIGHTEN SCREW5ATTACH POWER CORD TO BASE PAN WITH CLAMP

Base pan

Power cord

Clamp

6ATTACH FRONT GRILLE

An opening for the power cord is on the bottom of the front grille.

Remove shipping pads (if present)

3CAREFULLY SLIDE AIR CONDITIONER BACK INTO CASE

Make sure that the tubing on the unit does not touch the wall case and that the case installation is secure.

14