and Cleaning Operating Instructions Safety Instructions

About the controls on the air conditioner—Heat/Cool Models

Appearance may vary.

Air Conditioner Controls

Remote Control

Lights beside the touch pads on the air conditioner

control panel indicate the selected settings.

Controls

Troubleshooting Tips InstallationInstructions Care

ON/OFF

Turns air conditioner on and off.

Display

Displays the temperature setting. Displays hours when setting the timer.

MODE

On the air conditioner controls, use to set COOL, HEAT or FAN mode. Indicator lights on the air conditioner controls will show the mode selected.

TEMP Increase + /Decrease – Pads

Use to set temperature when in COOL or HEAT mode.

FAN Speeds

Use to set the fan speed at LOW or HIGH. Indicator lights will show the speed selected.

TIMER

ON—When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel the On Timer, press the ON pad until the display time disappears.

OFF—When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel the Off Timer, press the OFF pad until the display time disappears.

Remote Control Signal Receiver

NOTE: When the air conditioner is turned on,

it will automatically start in the setting last used.

Consumer Support

Remote Control

■ To ensure proper operation, aim the

■ Make sure nothing is between the air

remote control at the signal receiver

conditioner and the remote control that could

on the air conditioner.

block the signal.

■ The remote control signal has a range

■ Make sure batteries are fresh and installed

of up to 21 feet.

correctly—see the Care and Cleaning section.

6