GE MODE, SLEEP, TIMER, ON/OFF, Display, Support, Consumer, Remote Control, Air Conditioner Controls, TEMP Increase + /Decrease – Pads

Cleaning Operating Instructions Safety Instructions

About the controls on the air conditioner—Cool Only Models

Appearance may vary.

Air Conditioner Controls Remote Control

Lights beside the touch pads on the air conditioner

control panel indicate the selected settings.

Controls

Troubleshooting Tips InstallationInstructions Care and

ON/OFF

Turns air conditioner on and off.

Display

Displays the temperature setting. Displays hours when setting the timer.

MODE

On the remote control, use to set the air conditioner to COOL or FAN mode.

On the air conditioner controls, use to set COOL or FAN mode at HIGH, MED or LOW fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected.

TEMP Increase + /Decrease – Pads

Use to set temperature when in COOL mode.

Fan Speeds (Remote control only)

Use to set the fan speed at LOW, MED or HIGH.

To cancel the On Timer, press the ON pad until the display time disappears.

OFF—When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel the Off Timer, press the OFF pad until the display time disappears.

SLEEP

Press to set the air conditioner to run for 8 hours before it automatically returns to the previous setting.

When the sleep timer is set, the set temperature will automatically increase 2°F after the second hour then 1°F each hour over the next two hours.

To cancel the sleep mode, press the MODE pad or the SLEEPpad a second time.

Support

TIMER	Remote Control Signal Receiver
ON—When the air conditioner is off, it can
be set to automatically turn on in half an	NOTE: When the air conditioner is turned on,
hour to 24 hours at its previous setting.
	it will automatically start in the setting last used.
Each touch will set the time in half hours up
to 10 and then in hours up to 24.

Consumer

Remote Control

■ To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

4	■ The remote control signal has a range
	of up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly—see the Care and Cleaning section.