GEAppliances.com

COOL MODE

Safety

RemoteControl

1.Press COOLpad.

2.Press LOWor HIGHpads to set desired fan speed.

3.Press the INCREASE+ /DECREASE– pads to set the desired temperature 60°F to 85°F in 1°F increments.

ControlPanel

1.Press the MODEpad until the COOLindicator light is lit.

2.Press the FANpad until HIGHor LOWindicator light is lit for desired fan speed.

3.Press the INCREASE+/DECREASE–pads to set the desired temperature 60°F to 85°F in 1°F increments.

A thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler.

Set the thermostat at a higher number and the indoor air will become warmer.

NOTE:If the air conditioner is off and is then turned on while set to COOL, it will take approximately 3 minutes for the compressor to start and cooling to begin.

CoolingDescriptions

ForNormalCooling—Select the COOLmode and HIGH fan with a middle set temperature.

ForMaximumCooling—Select the COOLmode and HIGHfan with a lower set temperature.

ForQuieterandNighttimeCooling—Select the COOL mode and LOWfan with a middle set temperature.

NOTE:Therewillbea3-minutedelaybetweensetting changessuchasCOOLtoOFFandbacktoCOOL.

and Care Instructions Operating Instructions

HEAT MODE

RemoteControl

1.Press HEATpad.

2.Press LOWor HIGHpads to set desired fan speed.

3.Press the INCREASE+ /DECREASE– pads to set the desired temperature 60°F to 85°F in 1°F increments.

ControlPanel

1.Press the MODEpad until the HEATindicator light is lit.

2.Press the FANpad until HIGHor LOWindicator light is lit for desired fan speed.

3.Press the INCREASE+/DECREASE–pads to set the desired temperature 60°F to 85°F in 1°F increments.

A thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a higher number and the indoor air will become warmer.

Set the thermostat at a lower number and the indoor air will become cooler.

NOTE:If the air conditioner is off and is then turned on while set to HEAT, it will take approximately 3 minutes for the compressor to start and heating to begin.

HeatingDescriptions

ForNormalHeating—Select the Heatmode and HIGH fan with a middle set temperature.

ForMaximumHeating—Select the HEATmode and HIGHfan with a higher set temperature.

ForQuieterandNighttimeHeating—Select the HEAT mode and LOWfan with a middle set temperature.

NOTE:Therewillbea3-minutedelaybetweensetting changessuchasHEATtoOFFandbacktoHEAT.

Troubleshooting InstructionsInstallation Cleaning

FAN

Use the FANto provide air circulation and filtering without cooling or heating. Since fan only settings do not provide cooling or heating, a temperature setting will not be displayed.

RemoteControl

Press FANpad. Press LOWor HIGHpads to set desired fan speed.

ControlPanel

Press the MODEpad until the FANindicator light is lit and the LOWor HIGHindicator light is lit for the desired fan speed.

Support Consumer Tips

7