Installation Instructions

5INSTALL CEILING BRACKET

The ceiling bracket must be installed when the duct cover is used to span 24” or more height above the hood. The bracket will hold the decorative duct cover in place at the top.

Note: The ceiling bracket is not required when using only the 12” section of the duct cover.

Install the 2 small screws into the sides of the duct bracket. Remove the screws. Pre-tapping the holes will insure ease of final installation.

Match center notch on the bracket to the centerline on the wall and flush against the ceiling.

Mark the 2 screw hole locations.

Drill 1/8” pilot holes in marked bracket location.

If pilot holes do not enter studs, enlarge the holes to 3/8” and install wall fastener anchors.

Secure the bracket to the rear wall with wood screws and washers. Use wall anchors if needed.

Note: Bracket has 2 sets of holes. Use larger holes for wall fasteners or wood screws with washers. Use smaller holes for wood screws with washers.

Install Ceiling Bracket When Duct Cover is Used to Span 24” or more

See Step 9

to Install

Duct Cover

1 Ft = 0.3 m 1” = 2.5 cm

6CONNECT DUCTWORK

Push duct over the end of the transition until it reaches the stop tabs.

Install ductwork, making connections in direction of airflow as illustrated.

Secure joints in ductwork with sheetmetal screws.

Wrap all duct joints with duct tape for an airtight seal.

Use duct tape to seal the flange connection.

Duct Tape

Air Flow

 

Over Seam

Screw

and Screw

 

 

Duct

Duct Tape

Stops

Duct Tape

Over Flange

CAUTION:

Do not use sheet metal screws at the hood flange connection. Doing so will prevent proper damper operations. Seal connection with tape only.

16

Page 16
Image 16
GE CV936 manual Install Ceiling Bracket, Connect Ductwork

CV936 specifications

The GE CV936 is a versatile and powerful gas turbine designed for use in a variety of industrial and power generation applications. With its advanced design and state-of-the-art technologies, the CV936 represents a significant step forward in the field of aeroderivative gas turbines.

One of the standout features of the GE CV936 is its impressive efficiency. This turbine achieves a fuel efficiency rate that allows operators to maximize output while minimizing fuel consumption, thereby reducing overall operating costs. The efficiency extends beyond fuel usage, contributing to lower emissions as the turbine is designed to comply with rigorous environmental regulations.

The CV936 incorporates advanced aerodynamics in its design. Its blades are engineered using sophisticated computer modeling techniques that enhance airflow and optimize performance. The materials chosen for these components are lightweight yet durable, which contributes to the turbine’s ability to operate at high temperatures without degradation in performance.

A significant technology aspect of the GE CV936 is its modular design. This feature not only simplifies maintenance but also allows for quick and efficient upgrades as technology evolves. Operators can benefit from improved performance without needing to replace the entire turbine, which can be a cost-effective solution for many businesses.

Another characteristic that sets the CV936 apart is its robust control system. Coupled with advanced sensors and data analytics capabilities, the turbine provides real-time monitoring and operational insights. This allows for proactive maintenance strategies, reducing downtime and extending the operational lifespan of the equipment.

The turbine's design also accommodates a wide variety of fuels, making it exceptionally flexible for different operational contexts. Whether used in simple cycle, combined cycle, or cogeneration setups, the CV936 can efficiently use natural gas and liquid fuels, giving operators the flexibility to adapt to their specific energy needs.

In summary, the GE CV936 gas turbine is a cutting-edge solution that combines high efficiency, advanced aerodynamics, modular design, and robust control technologies. Its ability to adapt to various fuel types and configurations makes it an excellent choice for companies looking to optimize their power generation capabilities while minimizing environmental impact.