GE DEH-230 - page 49

Part II – Replacing the CPU 49

•The CPU Option String file dialog box opens. Select the CPU Option String obtained from GE

for the CPU being replaced:

Figure 12-8 Browse CPU Option String File dialog box

•After selecting the option string, the St ep 3 – Set Default IP dialog box will display as shown

below. This will change the configured address within the HMI to the default address of a

new CPU in preparation for communicating with it in Step 4.

NOTE: If the IP Address of the CPU has al ready been set to the default I P address, select Skip

This Task and click Next. Otherwise, click Next. The current IP configuration will be sto red

before it is changed.