Part II – Replacing the CPU 51
12
•Apply power to the new CPU and allow 2 minutes for the device to self-initialize prior to
performing Step 4. If the new CPU is known to already have an IP address as specified in the
Step 4 dialog box, select the Skip This Task check box prior to clicking Nex t. Otherwise, leave
the check box cleared and jus t click Next.
Figure 12-10 Step 4 – Set Original IP dialog box
•A confirmation dialog box will display asking for confirmation that the old CPU has been
replaced and the new CPU is installed and has been powered on for at least 2 minutes.
Figure 12-11 Entellisys LVS HMI dialog box