Other maintenance functions56
13
•Compartment#: Unique iden tifier for the location of the circu it breaker in the switchgear.
The Compartment# is set by the factory upon shipment to the customer and cannot be
changed. It is often included on nameplates on the switchgear.
3. Click the Save button to keep changes (or click Cancel to exit the screen without saving).
NOTE: Changes to circuit breaker names will not be reflected on the custom Oneline screen.
Contact GE Post Sales Support for details about updating to the Oneline screen (see How to
contact us onpage 2).
13.2 Viewing and up dating circuit breaker accessories
The HMI displays the circuit breaker status for ea ch circuit breaker in the system. To displa y the
proper circuit breaker status, the installed accessories must be known.
The following is affected by th e installed accessories:
•Breaker Racking Position status is available only if the position switch accessory is installed.
•Electrically Locked Out status is availa ble only if either the Bell-Alarm or Network Interlock
accessory is present.
•Closing Spring Status is available only if the Electric Operated accessory is present.
Additionally, the Breaker Control relies o n the electric operated circuit breaker accessory. The
remote control functions will be limite d by the presence of the electrically operated accessory.
The following functions in the H MI Breaker Control are affected:
•Open Breaker function is displa yed only if the electrical opera ted accessory is present .
•Close Breaker function is displaye d only if the electrical operate d accessory is present.
•Trip Breaker is NOT affected.
GE configures the proper circuit breaker accessories upon shipment of the switchgear. However,
if the accessories change or if different circuit breakers are exchanged, the accessories must be
updated, otherwise the status mig ht not be correct.