Installation Instructions
PARTS PROVIDED
Locate the parts packed with the Water Heater.
4 #10 x 11⁄4″ Wood Screws
Gas Valve 3/4″ FNPT Ball Valve
TOOLS YOU WILL NEED
• | Pipe Wrenches (2) | • | Gloves |
• | Adjustable Pliers | • | Safety Glasses |
•Screwdrivers (2)
•Wire Cutters
MATERIALSYOU WILL NEED TO SUPPLY
• Soap Solution | • Pipe Fittings Required: |
• Pipe Compound | – Unions |
• Approved Venting | – Ball Valves |
• 5/8″ ID PVC Flexible | – Drain Valves |
Tubing | – Pressure Relief Valve |
•2 Conductor 22 AWG Wire for Remote Control
•Single Gang Electrical Box
•Wire Nuts
•Concrete Wall Anchors (Optional)
OTHER TOOLS THAT MIGHT BE REQUIRED
•Hammer Drill with Concrete Bits
•Saw
•Threading Machine with Heads and Oiler
•Core Drill with Diamond Head
•Torch Set
•Copper Tubing Cutter
•Steel Pipe Cutter
OTHER MATERIALS THATMIGHT BE NEEDED
•Heat Tape
•Pipe Insulation
•Electrical Wire and Conduit per Local Code
•Air Inlet Screen
•Optional Pipe Cover AGTPCM
•Optional Remote Controller AGTRC1
Your installation components may vary.
3
