Special features of your oven control.

Tone Volume

+

This feature allows you to adjust the tone

 

 

 

 

volumes to a more acceptable volume. There are

 

 

three possible volume levels.

 

 

 

 

 

 

Touch the BROIL HI/LO and BAKE

 

 

pads at the same time for 3 seconds,

 

 

until the display shows SF.

 

 

Touch the OVEN LIGHT ON/OFF pad.

 

 

The display will show 2 BEEP. This is

 

 

the high volume level.

 

 

Touch the OVEN LIGHT ON/OFF pad

 

 

again. The display will show 3 BEEP.

 

 

This is the loudest volume level.

Touch the OVEN LIGHT ON/OFF pad again. The display will show 1 BEEP. This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

Choose the desired sound level (1 BEEP, 2 BEEP, 3 BEEP).

Touch the START pad to activate the level shown.

+

12-Hour, 24-Hour or Clock Blackout

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

Touch the BROIL HI/LO and BAKE pads at the same time for 3 seconds until the display shows SF.

Touch the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, touch the START pad.

Touch the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the START pad.

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Touch the CLOCK pad once. The

NOTE: If the clock is in the black-out mode you

display will show 12 hr. If this is

will not be able to use the Delay Start function.

the choice you want, touch the

 

START pad.

 

26

Page 26
Image 26
GE J2S968 manual Tone Volume, Three possible volume levels, Hour, 24-Hour or Clock Blackout, Start pad

J2S968 specifications

The GE J2S968 is a high-performance jet engine that has carved a niche for itself in the aviation industry, particularly in corporate and regional jet markets. Designed with the latest technologies, the J2S968 combines efficiency, reliability, and advanced engineering to meet the demands of modern aviation.

One of the standout features of the J2S968 is its turbofan design, which significantly enhances its operational efficiency compared to traditional turbojet engines. The engine employs a wide-chord fan blade technology that not only improves thrust but also minimizes noise levels, adhering to strict environmental regulations. This makes the J2S968 an ideal choice for operators prioritizing sustainability without compromising performance.

Another key characteristic of the J2S968 is its power and thrust capabilities. With a thrust range that typically exceeds 4,000 pounds, this engine can support a variety of aircraft sizes. This engine is particularly favored in the business aviation sector, where performance and range are critical. The advanced materials used in its construction also contribute to weight reduction, further enhancing fuel efficiency and overall performance.

The GE J2S968 incorporates advanced digital engine control systems, which facilitate precise power management and optimize fuel consumption. This technology allows for more efficient operation throughout different phases of flight, translating into reduced operational costs for operators. Enhanced diagnostic capabilities are also a key component, enabling real-time monitoring of engine performance, which aids in maintenance and prolongs service life.

In terms of maintenance, the J2S968 is designed with accessibility in mind. Its modular architecture allows for quick and easy servicing, reducing downtime and ensuring higher aircraft availability. This is particularly important for business aviation where time is often of the essence.

The engine's reliability is further underscored by its track record. Built on GE's extensive experience in the aerospace sector, the J2S968 benefits from rigorous testing and certification processes, ensuring it meets the highest safety and performance standards.

In summary, the GE J2S968 represents a fusion of cutting-edge technology, efficient performance, and reliability. Its significant advancements in turbofan design, power management, and maintenance make it a preferred choice for regional jets and business aircraft. As the aviation industry continues to evolve, the J2S968 stands as a testament to GE's commitment to innovation and excellence in aerospace engineering.