GE 49-80591-2 Using the oven control, clock Timer features and settings, Safety Instructions

Using the oven control, clock
and timer features and settings.	GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

	bake/Temp Recall Pad			Start Time Pad
			Start
Bake	Touch this pad to select the bake function.			Use along with the Cooking Time
	bake light		Time	or Self Clean pads to set the oven
Temp Recall
	Flashes while in edit mode—you can change the oven			to start and stop automatically
				at a time you set.
	temperature at this point. Glows when the oven is in
	bake mode.	Start Time light
	Start/On Pad	Flashes while in edit mode—you can change the start
	Must be touched to start any cooking or cleaning	time at this point. Glows when the function has been
	function.	activated.

Safety Instructions

Kitchen

Timer

On/Off

Display

Shows the time of day, oven temperature and the times set for the timer or automatic oven operations. The display will show PrE while preheating. When the oven reaches the selected temperature, the oven control will beep and the display will show the oven temperature.

If “F–” and a number or letter flash in the display and the oven control signals, this indicates a function error code.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage. Reset the clock.

If the function error code appears during the self- cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go.

Touch the Clear/Off pad. Allow the oven to cool

for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the range and call for service.

Kitchen Timer On/Off or Timer On/Off Pad

Touch this pad to select the timer feature. Then press + and – pads to adjust time.

Timer light

Flashes while in edit mode—you can change the set time at this point. Glows when the timer has been activated. Flashes again when the time has run out until the control is reset.

	Cooking Time Pad
Cooking	Touch this pad and then touch the
Time	+ or – pads to set the amount of
	time you want your food to cook.
	The oven will shut off when the
	cooking time has run out.

Cooking Time light

Flashes while in edit mode—you can change the set time at this point. Glows when the function has been activated. Flashes again when the time has run out until the control is reset.

Automatic Oven light This lights anytime the oven has been programmed using the Cooking Time or Start Time functions.

Oven	Oven light On/Off Pad
Light	Touch this pad to turn the oven light
On/Off	on or off.

– Pad

Short taps to this pad will decrease the time or temperature by small amounts. Touch and hold the pad to decrease the time or temperature by larger amounts.

+ Pad

Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts.

Operating Instructions

Care and Cleaning Troubleshooting Tips

Clock Pad

Clock	To set the clock, press this pad twice and then
	press the + and – pads. The time of day will flash in
	the display when the oven is first
	turned on.

11

Consumer Support