Care and cleaning of the range. | GEAppliances.com |
be sure all controls are off and all surfaces are cool before cleaning any part of the range.
|
| WARNING | If your range is removed for cleaning, servicing or |
|
| ||
|
| any reason, be sure the | |
|
| ||
| properly when the range is | replaced. Failure to take this precaution could result in | |
tipping of the range and cause injury. | |||
How to Remove Protective Shipping Film and Packaging Tape
Safety Instructions
Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.
To ensure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Operating Instructions
Control Knobs
The control knobs may be removed for easier cleaning.
Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.
The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the inside of the knobs are dry before replacing.
Replace the knobs, in the OFF position to ensure proper placement.
Care
Control Panel
It’s a good idea to wipe the control panel after each use of the oven. Use a damp cloth to clean or rinse. For cleaning, use mild soap and water or a 50/50 solution of vinegar and water. For rinsing, use clean water. Polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the control
and Cleaning
Painted Surfaces
Painted surfaces include the sides of the range | Do not use commercial oven cleaners, cleaning |
and the door, top of control panel and the | powders, steel wool or harsh abrasives on any |
drawer front. Clean these with soap and water | painted surface. |
or a vinegar and water solution. |
|
Stainless Steel Surfaces (on some models)
Troubleshooting
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm, sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our
National Parts Center | 1.800.626.2002 |
GEAppliances.com |
|
Tips
Porcelain Enamel Cooktop (on some models)
The porcelain enamel finish is sturdy but breakable if misused. This finish is acid- resistant. However, any acidic foods spilled (such as fruit juices, tomato or vinegar) should not be permitted to remain
on the finish.
If acids spill on the cooktop while it is hot, use a dry paper towel or cloth to wipe it up
right away. When the surface has cooled, wash with soap and water. Rinse well.
For other spills such as fat spatterings, wash with soap and water or cleansing powders after the surface has cooled.
Rinse well. Polish with a dry cloth.
25
