Using the self-cleaning oven. (on some models)

CAUTION

CAUTION

Self

Clean

FIRE HAzARD: Wipe grease and heavy soil from oven before self-cleaning. Failure to do so may result in an oven fire.

Never place cooking utensils, baking stones, foil, or any other items on the oven floor. Even items rated for high temperature may permanently adhere to oven bottom or cause heat damage to the oven, flooring or items in storage drawer.

If your range has this control pad, it has a self-cleaning oven. Follow these instructions.

If not, refer to the Porcelain Oven Cleaning section for oven cleaning instructions.

Safety Instructions

Operating Instructions

Tips Care and Cleaning

Wipe up heavy soil on the oven bottom.

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove broiler pan, broiler grid, all cookware and any aluminum foil from the oven.

NOTE:

If your oven is equipped with shiny, silver-colored oven racks, we recommend to remove them before you begin the self-clean cycle. They may remain in the oven during the self-clean cycle, but they will darken, lose their luster and become hard to slide.

If your oven is equipped with gray porcelain-coated oven racks, they may be left in the oven during the self-clean cycle.

Soil on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled or plastic scouring pads or cleansers such as Soft Scrub®. Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

Consumer Support Troubleshooting

How to Set the Oven for Cleaning

Follow the directions in the before a Clean

Cycle section.

 

 

 

Latch the door.

 

 

 

NOTE: Never force the latch. If the oven is

 

 

 

too hot, you will not be able to slide the

 

Self

latch. Allow the oven to cool.

 

Touch the Self Clean pad.

Clean

 

 

 

Touch the + or pads until the

 

 

 

desired Clean Time is displayed.

 

 

 

The Clean Time is normally 4 hours and 20

 

 

 

minutes. You can change the Clean Time

 

Start

to any time between 3 and 5 hours,

 

On

 

depending on the amount of soil in your

 

 

 

oven.

 

 

 

Touch the Start/On pad.

The self-clean cycle will automatically begin after Clean is displayed and the time countdown appears in the display.

While the oven is self-cleaning, you can touch the Clock pad to display the time of day. To return to the clean countdown, touch the Self Clean pad.

The oven shuts off automatically when the clean cycle is complete, and 0:00 will flash in the display.

Slide the latch handle to the left as far as it will go and open the door.

NOTE: Never force the latch handle. Forcing the handle will damage the door lock mechanism.

22

Page 22
Image 22
GE JBP28DRCC Using the self-cleaning oven. on some models, Before a Clean Cycle, How to Set the Oven for Cleaning