GE JBP55 OVEN CONTROL, CLOCK Am T~ER, To Set the Clock, To Set the Timer, Power Outage

OVEN CONTROL, CLOCK Am T~ER

Clock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Baking or Self-Cleaning cycle.

To Set the Clock

1.Press the CLOCK pad.

CLOCK

n

2.Press the INCREASE or DECREASE pad to set the time of day.

3.Press the CLOCK pad to start.

Timer

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer

1.Press the TIMER ON/OFF pad.

TIMER

ON/OFF

D

2.Press the INCREASE or DECREASE pad to set the amount of time on timer. The timer will start automatically within a few seconds of releasing the pad.

The timer, as you are setting it, will display seconds until 1 minute is reached. Then it will display minutes and seconds until 60 minutes is reached.

After 60 minutes, it will display hours (“HR” now appears in the display) and minutes until the maximum time of 9 hours and 55 minutes is reached.

To Reset the Timer

If “TIMER” is displayed, press the INCREASE or DECREASE pad until the desired time is reached.

If “TIMER” is not displayed, press the TIMER pad first. then follow the instructions above to set the timer.

To Cancel the Timer

Press and hold the TIMER ON/OFF pad until the word “TIMER” disappears from the display.

Power Outage

After a power outage, when power is restored, the display will flash and time shown will no longer be correct—for example, after a 5-minute power interruption the clock will be 5 minutes slow. All other functions that were in operation when the power went out will have to be programmed again.

End of Cycle Tone

The end of cycle tone is a series of 3 beeps followed by 1 beep every 6 seconds. If you would like to remove the signal that beeps every 6 seconds, press and hold the CLEAWOFF pad for 10 seconds.

To return the signal that beeps every 6 seconds, press and hold the CLEAWOFF pad for 10 seconds.

Display Messages

If “door” appears in the display, the door latch handle is not moved all the way to the right. Move the latch handle and cleaning will start. If “LOCK” appears in the display, the oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if the door is in the locked position.

12