GE JBP56, JBP55 How to Set the Oven for Cleaning, To Stop a Clean Cycle, After a Clean Cycle

Models: JBP56 JBP55

1 36
Download 36 pages 54.6 Kb
Page 23
Image 23
How to Set the Oven for Cleaning

How to Set the Oven for Cleaning

Quick Reminder:

1.Latch the door.

2.Press the AUTO SELF CLEAN pad.

3.Press the INCREASE or DECREASE pad to set the Clean Time.

If the oven is too hot and you start to set a clean cycle, the word “OFF” will appear in the display, Allow additional time for cooling before you try to set the cycle.

1.Follow directions to prepare the oven for cleaning.

2.Slide the latch handle to the ~ right as far as it will go.

Never force the latch 4 handle. Forcing the

handle will damage the door lock mechanism.

✛✛✚✛ 3. Press the AUTO SELF CLEAN pad.

CLEAN

4.Press the INCREASE or DECREASE pad until the desired Clean Time is displayed. ‘

Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the time for the clean cycle is set. The words “ON” and “LOCK” will appear in the display. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes off.

5.When the LOCK light is off, slide the latch handle to the left as far as it will go and open the door.

The word “door” will be displayed, the word “LOCK” will flash and oven control will signal if you set the clean cycle and forget to close the oven door.

To Stop a Clean Cycle

1.Press the CLEAWOFF pad.

2.When the LOCK light goes off and the oven has cooled below the locking temperature, open the door.

After a Clean Cycle

After cleaning is complete, the door latch must be returned to its original position before you can use the oven. The oven door will stay locked until the oven cools. If you cannot slide the latch easily to unlock the door, allow additional time for cooling.

Never force the latch handle. The latch slides easily. Forcing the latch handle may damage the door lock.

You may notice some white ash in the oven. Just

wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

If the shelves have become hard to slide, wipe the shelf supports with cooking oil.

(continued next []age)

23

Page 23
Image 23
GE JBP56, JBP55 How to Set the Oven for Cleaning, To Stop a Clean Cycle, After a Clean Cycle, Quick Reminder