GE JBP79 Installing the Range, Le Es Oe, Storage Drawer Removal, Replacing, the Oven Door

Installation Instructions

Installing the Range

Storage Drawer Removal

I-_ Pull the drawer out until it stops

CAUTION: The oven door is heavy.

You may need help lifting the door high enough to slide it into the

hinges slots. Do not lift the door by the handle.

r-_ Lift the front of the drawer until

the stops clear the guide.

_ Remove the Stop

drawer.

Final Check of the Anti-Tip Bracket

When installation is complete and the range is in place, inspect to be sure the

rear leveling leg is fully inserted into the slot of

the Anti-Tip Bracket.

Replacing		the Oven Door
r-_	Pick	the Oven Door up		\ :ii_
	by placing both hands on
	each	side. The door is		:
	heavy so you may need
	help. Do not lift the door			r
	by the handle.
r_	Place	the notch of the
	hinge arm into the bot-		Bottom	Edge Hinge Arm

tom edge of the hinge slot.

Hinge Notch

Level the Range

The range must be level for proper cooking and baking.

I-_	Install the oven			racks.(See		Owner's
	Manual for		instructions.)
I-_	Put a spirit		level	or a glass		SPIRIT
						_R_T I--_====='_
	measuring		cup	partially
	filled with water on one of
	the oven	racks.
	Remove	the
	storage drawer.
	The front	leveling				LOWER
	legs can be				LE_ES"_ _OE
	accessed	from		the

bottom and the rear legs from the top.

I-_-1-1 Open the oven door as far as it will open.

Push the hinge locks

up against the front frame of the oven

cavity, to the locked position.

Close the oven door.

Hinge in

Locked Position

Hinge Securely

Fitted into Bottom

of Hinge Slot

I-_ Use an adjustable wrench to adjust all four leg levelers until the range is level.

9 Continued on following page