Nortel Networks NN46110-602 manual Branch office messages, Couldnt install route for remxxx@xxx

178 Appendix C System messages

ISAKMP [13] Invalid ID information in message from xxx (a.b.c.d)

Description: One side of the connection is configured to support dynamic routing while the other side is configured for static routing. Branch office is xxx.

Action: Configure both sides to use the same routing type.

Description: Both sides are configured to support static routing, however the local and remote network definitions of the two sides do not match. Branch office is xxx.

Action: Configure both sides to have matching local and remote network definitions.

ISAKMP [13] Error notification (Invalid ID information) received from xxx (a.b.c.d)

Description: One side of the connection is configured to support dynamic routing while the other side is configured for static routing. Branch office is xxx.

Action: Configure both sides to use the same routing type.

Description: Both sides are configured to support static routing. However, the local and remote network definitions of the two sides do not match. Branch office is xxx.

Action: Configure both sides to have matching local and remote network definitions.

Branch office messages

Couldn't install route for remxxx@xxx

Description: The VPN Router cannot install the route for the remote network (indicated by remxxx@xxx). This happens when the route collides with an existing static route.

NN46110-602