Nortel Networks NN46110-602 manual CES#capture ether0

Chapter 5 Packet capture 117

To configure a capture object:

1Navigate to Capture Configuration mode by entering the capture command with the object name.

CES#capture ether0

CES(capture-ethernet)#

The resulting prompt shows the type of capture object (physical interface, tunnel, or global IP).

2Display all parameters that you can configure for that type of capture object.

CES(capture-ethernet)#?

Packet capture mode
direction	Captures in one direction
exit	Exits capture mode
filter	Applies interface traffic filter to
	capture only matching traffic
length	Specifies how many octets to capture for
	every packet
no	Disables features and settings
promiscuous	Enables promiscuous mode when capture is
	running
trigger	Enables triggers
wrapping	Continues capturing when buffer gets full

CES(capture-ethernet)#

3Edit one or more parameters as required.

Note: The promiscuous parameter is available for Ethernet capture objects only.

For the syntax of any command, see the Nortel VPN Router Using the Command Line Interface (NN46110-507).

Nortel VPN Router Troubleshooting