Nortel Networks NN46110-602 manual Can not accept x.x.x.x as router id, LoadOspfAreas Failed

200 Appendix C System messages

Can not accept x.x.x.x as router id

Description: OSPF can not accept the given router ID in the Routing > OSPF window.

Action: You must change router ID in the Routing > OSPF window. Invalid router IDs are 127.0.0.1 and 0.0.0.0.

LoadOspfAreas Failed

Description: OSPF failed to load all areas of information from the config file. This happens if the config file is damaged.

Action: Delete all OSPF areas, recreate them from the Routing > OSPF window, and reboot the VPN Router.

LoadOspfIntf Failed

Description: OSPF failed to load information for all interfaces from the config file. This happens if the config file is damaged.

Action: Delete all OSPF interfaces, re-create them from the Routing > Interface window, and reboot the VPN Router.

VR xxx: Starting xxx as Master for xxx

Description: Logged when VRRP is starting as a master for an address. The parameters are:

•The VRID of this VR

•The reason for starting, either because it was enabled or the interface went up

•The IP address

Action: No action required.

NN46110-602