Nortel Networks NN46110-602 manual Configuring the VPN Router for Cisco interoperability

210 Appendix D Configuring for interoperability

dialer-list 1 protocol ipx permit snmp-server community public RO line con 0

line aux 0 line vty 0 4 password terminal login

end

Configuring the VPN Router for Cisco interoperability

To configure the VPN Router for Cisco interoperability:

1Select to Profiles > Networks and click Edit.

2Create any local accessible networks that you want available.

3Enter the IP address for the new subnet; for example, 10.18.0.45.

4Enter the subnet mask for the new network.

5Click Add.

The Networks Edit window appears and shows the newly created subnet in the Current Subnets list for the named network.

6Add each local subnet to a Network profile for which you want tunneled connections coming to or going from the .

7On the Profiles > Branch Office: Edit GROUP window, verify that your settings are synchronized with the Cisco router .

For Cisco, to turn off Vendor ID and Perfect Forward Secrecy (PFS), go to the Profiles > Groups > IPsec: Configure window.

8Create and configure the IPsec branch office connection on the VPN Router, using the network profile you just created for the local accessible network.

9On the Profiles > Branch Office window, enable IPsec Authentication: Text Pre-Shared Key.

NN46110-602