Nortel Networks NN46110-602 manual CES# show capture

120 Chapter 5 Packet capture

In the following example, the show capture command is run with no object name to display a list of all the capture objects configured on the VPN Router.

CES# show capture

Name	Type	Size	Buffer use	Count	State
bot1	TUNNEL	1048576	0%	0	EMPTY
ether0	ETHERNET	1048576	7%	984	STOPPED
rawip1	GLOBAL	1048576	0%	0	EMPTY
CES#

The following example shows the type of output you see when you enter the show capture command for a specific capture object.

CES# show capture bot1

Capture state:		STOPPED
Capture buffer	size:	1048576
Capture type:		TUNNEL
Tunnel type to	capture:	IPSEC
Tunnel encapsulation to capture:		INITIATOR
Restarting capture on tunnel logoff:		DISABLED
Capturing MAX octets per frame:		4096
Captured frames:		0
Capture buffer	utilization:	0%
Capturing direction:		BIDIRECTIONAL
Capture buffer	wrapping:	DISABLED
Capture buffer	wrapped:	FALSE
Capture filter	applied:	permit all
Capture filter	discards:	0
Start trigger applied:		permit all
Start trigger discards:		0
Stop trigger applied:		permit all
CES#

NN46110-602