Nortel Networks NN46110-602 manual Tunnel capture parameters

118 Chapter 5 Packet capture

Tunnel capture parameters

Capture objects for tunnels have several unique parameters. The following example creates a tunnel object called bot1, navigates to Capture Configuration mode, and displays the commands for tunnel objects. The commands in bold are the commands that are available only for tunnel objects. For more information about tunnel capture objects, see “Tunnel captures” on page 106.

CES#capture add bot1 tunnel

CES#capture bot1

CES(capture-tunnel)#?

Packet capture mode

direction	Captures in one direction
exit	Exits capture mode
filter	Applies interface traffic filter to capture
	only matching traffic
length	Specifies how many octets to capture for
	every packet
no	Disables features and settings
persistent	Restarts capture on session disconnect
remoteip	Captures sessions from this IP address
trigger	Enables triggers
type	Captures only sessions of specific type
userid	Captures sessions from this user
wrapping	Continues capturing when buffer gets full

CES(capture-tunnel)#

For the syntax of any command, see the Nortel VPN Router Using the Command Line Interface (NN46110-507).

NN46110-602