Nortel Networks NN46110-602 Configuring and running packet capture objects, Saving captured data

Chapter 5 Packet capture 115

For example, enter:

CES(capture-ethernet)#maxfiles 99

Saving captured data

To set the PCAP capture mode to loss or no loss, from CLI Capture Configuration Mode enter:

capture-all

or

No capture-all

For example, enter:

CES(capture-ethernet)#capture-all

Configuring and running packet capture objects

This section provides instructions for creating, configuring, starting, and stopping capture objects, as well as instructions for saving captured traffic to a file on disk. For the complete syntax of the packet capture commands shown in this section, see the Nortel VPN Router Using the Command Line Interface.

Creating a capture object

To create a capture object, use the capture add command. (For information about the types of object that you can create, see “Capture types” on page 106.)

1To view the types of capture objects that you can configure, enter the following command at the Privileged EXEC prompt.

CES# capture add <object_name> ?

Nortel VPN Router Troubleshooting