GE JBP95 warranty How to Set the Oven for Cleaning, After a Clean Cycle, To Stop a Clean Cycle

OPERATING THE SELF-CLEANING OVEN

(continued)

How to Set the Oven for Cleaning

Quick Reminder:

1.Latch the oven door.

2.Press the AUTO SELF CLEAN pad.

3.Press the + or – pad until the desired Clean Time appears.

If the oven is too hot and you start to set a clean cycle, the word “OFF” will appear in the display. Allow additional time for cooling before you try to set the cycle.

1.Follow the directions to prepare the oven for cleaning.

2.Close the oven door and

slide the latch handle to the right as far as it will go.

Never force the door latch handle. Forcing the handle may damage the door lock mechanism.

NOTE: The word “door” will be displayed, “LOCK” will flash and the oven control will signal if you set the Clean Cycle and forget to close or latch the oven door.

3.Press the AUTO SELF CLEAN pad.

AUTO SELF

CLEAN

	–	4. Press the + or – pad until the
+		desired Clean Time is displayed.

Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.

The self-clean cycle will automatically begin after “Clean” is displayed and the time for the Clean Cycle is set. The words “ON” and “LOCK” will appear in the display. It will not be possible to unlatch the oven door until the temperature drops below the lock temperature and the lock light goes off.

5.When the LOCK light is off, slide the latch handle to the left. If you cannot slide the latch easily to unlock the door, allow additional time for cooling.

NOTE: You can find out when the clean cycle will be finished by pressing the STOP TIME pad.

After a Clean Cycle

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.

Slide the latch handle to the left as far as it will go and open the door.

Never force the latch handle. The latch slides easily. Forcing the latch handle may damage the door lock.

You may notice some white ash in the oven.

Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

If the shelves have become hard to slide, wipe the shelf supports with cooking oil.

To Stop a Clean Cycle

1.Press the CLEAR/OFF pad.

2.When the LOCK light goes off and the oven has cooled below the locking temperature, open the door.

42