GE JCB905 Troubleshooting Tips Consumer, Oven Floor, Oven Racks and Convection Roasting Rack

Models: JCB905 JCB968

1 48
Download 48 pages 16.16 Kb
Page 33
Image 33
Oven Floor

 

 

 

 

 

 

 

 

 

 

www.GEAppliances.ca

 

 

 

 

 

 

 

 

 

Oven Floor

On some models, the bake element is not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not clean the broil element. Any soil

 

 

 

 

 

 

 

 

 

will burn off when the element is heated.

exposed and is under the oven floor. If spillovers,

 

 

 

 

 

 

 

 

 

Clean the oven floor with warm, soapy

residue or ash accumulate on the oven floor,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

water.

wipe up before self-cleaning.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wipe up heavy soil on the oven bottom.

Roasting rack

Oven Racks and Convection Roasting Rack

Oven rack

The convection roasting rack should be

NOTE: The shiny, silver-colored oven racks (on

removed from the oven before beginning

some models) and the convection roasting rack

 

the self-clean cycle. Clean with an abrasive

may be cleaned in the self-cleaning oven.

Offset racks

cleanser or steel wool. After cleaning,

However, the racks will darken in color, lose their

 

rinse the rack with clean water and

luster and become hard to slide if cleaned during

 

dry with a clean cloth.

the self-cleaning cycle.

 

If your oven is equipped with shiny,

To make the racks slide more easily,

 

silver-colored oven racks, they should be

apply a small amount of vegetable oil

 

removed from the oven before beginning

to a paper towel and wipe the edges

 

the self-clean cycle. Clean with an abrasive

of the oven racks with the paper towel.

 

cleanser or steel wool. After cleaning,

Do not spray with Pam® or other

 

rinse the racks with clean water and dry

lubricant sprays.

 

with a clean cloth.

 

 

If your oven is equipped with gray

 

 

porcelain-coated oven racks, they

 

 

may be cleaned in the oven during

 

 

the self-clean cycle.

 

Stainless Steel Surfaces (on some models)

Safety Instructions Operating Instructions Care and Cleaning

Do not use a steel-wool pad; it will scratch the surface.

Shake bottle well.

Place a small amount of Stainless Steel Appliance Cleaner on a damp cloth or damp paper towel.

Clean a small area (approximately 8″ x 8″), rubbing with the grain of the stainless steel if applicable.

Dry and buff with a clean, dry paper towel or soft cloth.

Repeat as necessary.

To inquire about purchasing Stainless Steel Appliance Cleaner, or to find the location of a dealer or Camco Parts Store nearest you, please call our toll-free number:

National Parts Center

1-800-661-1616

www.GEAppliances.ca

Troubleshooting Tips Consumer

Painted Surfaces

Painted surfaces include the door,

Do not use commercial oven cleaners,

top of the control panel and the drawer

cleaning powders, steel wool or harsh

front. Clean these with soap and water or

abrasives on any painted surface.

a vinegar and water solution.

 

33

Support

Page 33
Image 33
GE JCB905 Troubleshooting Tips Consumer, Oven Floor, Oven Racks and Convection Roasting Rack, Painted Surfaces, Support