Instructions

Using the self-cleaning oven.

The oven door must be closed and all controls set correctly for the cycle to work properly.

Cleaning Operating Instructions Safety

Wipe up heavy soil on the oven bottom.

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove the convection roasting rack, broiler pan, broiler grid, probe,

all cookware and any aluminum foil from the oven.

NOTE:

■If your oven is equipped with shiny, silver- colored oven racks, remove them before you begin the self-clean cycle.

■If your oven is equipped with gray porcelain- coated oven racks, they may be left in the oven during the self-clean cycle.

The shiny, silver-colored oven racks (on some models) and the convection roasting rack can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Soil on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads or cleansers such as Soft Scrub®. Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.

Wipe up any heavy spillovers on the oven bottom.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well- ventilated room.

Consumer Support Troubleshooting Tips Care and

How to Set the Oven for Cleaning

WARNING: The surface units are automatically disabled during the self-clean cycle. Make sure that all surface unit controls are turned off at all times during the self-clean cycle. Any surface unit that is set to an on position, while the self-clean cycle is operating, will automatically come on after the self-clean cycle is finished, and could result in an on, unattended surface unit. Wait until the self-clean cycle is finished to set and use the surface units.

Touch the SELF CLEAN STD/LO pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for

a dirtier oven.

If a time other than 4 hours or

3 hours is needed, use the number pads and enter the desired clean time.

24

You can change the clean time to any time between 21⁄2 hours and 5 hours, depending on how dirty your oven is.

Touch the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

When the LOCKED light goes off, you will be able to open the door.

■The word LOCKED will flash and the word door will display if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

Page 23 Page 25
Page 24
Image 24
GE JCB968, JCB905 owner manual Using the self-cleaning oven, Before a Clean Cycle, How to Set the Oven for Cleaning
Page 23 Page 25

JCB905, JCB968 specifications

The GE JCB968 and JCB905 are two powerful and efficient telehandlers that have made significant impacts in the construction, agricultural, and industrial sectors. Renowned for their reliability and versatility, these machines are designed to meet the demands of various heavy-duty applications.

The JCB968 is equipped with a robust engine that provides exceptional power and torque. It boasts a lifting capacity of up to 6,000 kg, making it suitable for lifting heavy loads, including pallets, materials, and equipment. The unit features a maximum lifting height of approximately 9 meters, allowing users to reach bins and heights that are otherwise difficult. One of the standout features of the JCB968 is its four-wheel drive system, which enhances traction and stability on uneven terrains. The machine also utilizes hydrostatic transmission, enabling smooth acceleration and precise control, essential for operators working in tight spaces.

Conversely, the JCB905 is notable for its compact design, making it ideal for confined job sites where space is at a premium. With a lifting capacity of 5,000 kg and an impressive reach of around 5.5 meters, the JCB905 is perfect for handling lighter materials while still offering excellent performance. Its tight turning radius allows for exceptional maneuverability, ensuring that operators can navigate through narrow aisles and work areas with ease.

Both machines leverage advanced hydraulic systems that improve efficiency and increase productivity. The JCB968 and JCB905 come equipped with various attachment options, such as forks, buckets, and winches, allowing for a wide range of applications from material handling to construction tasks. The cab design of both models enhances operator comfort and visibility, which is critical in ensuring safety and reducing fatigue during long working hours.

In terms of technologies, both telehandlers incorporate telematics systems that provide real-time data on machine performance, location, and health diagnostics. This allows for better fleet management and ensures that maintenance is carried out proactively, minimizing downtime.

Overall, the GE JCB968 and JCB905 are exemplary models that combine power, agility, and efficiency, making them indispensable assets in any operation requiring versatile handling capabilities. Their blend of modern technology and user-centric design stands as a testament to JCB's commitment to innovation and customer satisfaction.
Top Page Image Contents