Proper care and cleaning are important so your range will give you efficient
and satisfactory service. Follow these directions carefully in caring for it to
help assure safe and proper maintenance.
BE SURE ELECTRICAL POWER IS DISCONNECTED BEFORE
CLEANING ANY PART OF YOUR RANGE.
CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS AND DRIP PANS
(IF SO EQUIPPED) IN PLACE.

Sealed Burner Assemblies

(on some models)
~Grate

h

\;

Burner Cap
Turn all controls OFF before removing burner
parts and drip pans (if so equipped).
The burner grates, caps, burner heads and drip
pans (if so equipped) can be lifted off, making them
easy to clean.
The electrode of
Electrode
the spark igniter is
exposed. When one
burner is turned to LIT
all the burners spark. Do not attempt to
disassemble or clean around any
burner while another burner is on. An electric
shock may result, which could cause you to knock
over hot cookware.

Burner

Caps

(on sealed burners only)

Burner Base

(on sealed burners only)
Lift off when cool. Wash burner The burner base (the part of the
caps in hot, soapy water and rinse
with clean water. If desired, soak up to
-
burner fastened to the
cooktop)
may be
0
cleaned with a soft brush and a mild
~.
a
...>
30 minutes and scour with a plastic
@
● l
~
cleanser. Clean all food residues from
scouring pad to remove burned-on food particles. around spark electrode. Do not use steel
Dry them in a warm oven or with a cloth— wool; small bits of steel wool will short out the
do not reassemble them wet. electrode. Rinse well.
(continued next page)
21