GE JGBS79, JGBS78 Light the tilots, Check Ignition of Surface Burners, Surface Burner Ignition

Light the tilots (continued)

a

Heater Pilot Flame ~

4.Turn the OWN CONTROL knob to a setting above 200°F. The pilot flame will increase in size and impinge on the temperatureresponse element. The oven burner will light in 3090 seconds.

The oven burner will operate until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintin the oven at the temperature indicated by the OWN CONTROL knob.

E CHECK IGNITION OF SURFACE BURNERS

Surface Burner Ignition

Operation of all cooktop and oven burners should be checked after the pilots have been lighted (on some models) and range and gas supply lines have been carefully checked for leaks.

Stiding Pilot Models

Select a top burner knob and simultaneously push in and turn to HI position. The burner should light within a few seconds. Try each burner in succession until all burners have been checked.

Electric Ignition Models

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a snapping sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

Qualim of Flames

The combustion quality of burner flames needs to be determined visually.

m~~~~~~~~~mes~!;;’:;:: -

(B) Yellow tips on outer cones—

Normal for LP gas

(C) Soft blue tie~ Normal for natural gas

If burner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas you use.

With LP gas, some yellow tipping on outer cones is normal.

❑CHECK IGNITION OF OVEN BURNER

Your oven is designed to operate quietly and automatically. To operate the oven, turn the OWN CONTROL knob to a setting above 200° R After 30-90 seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will continue to cycle on and off as necessary to maintain the oven at the temperature indicated by the OWN CONTROL knob.

Electric ignition models require electrical power to operate. The oven cannot be lit during a power outage. Gas will not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the burner will shut off and cannot be re-lit until power is restored.

36