Installation Instructions
Range
If you have questions, call 800.GE.CARES or visit our Website at: ge.com
In the Commonwealth of
Massachusetts:
•This product must be installed by a licensed plumber or gas fitter.
•When using
•A flexible gas connector, when used, must not exceed 3 feet.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Installation of this range must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. This range has been
As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Information section in the front of this manual. Read them carefully.
•IMPORTANT – Save these
instructions for local electrical inspector’s use.
•IMPORTANT – Observe all governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the Consumer.
•Note to Consumer – Keep these instructions for future reference.
•Note – This appliance must be properly grounded.
•Servicer – The electrical diagram is in an envelope attached to the back of the range.
•Skill level – Installation of this appliance requires basic mechanical skills.
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
26
