PROBLEM
NUMBER FLASH
IN THE DISPLAY
OVEN WILL
NOT WORK
OVEN LIGHT DOES NOT WORK
FOOD DOES NOT BROIL PROPERLY
FOOD DOES NOT ROAST OR BAKE PROPERLY
OVEN WILL NOT
OVEN DOOR WILL NOT OPEN
OVEN NOT CLEAN AFTER CLEAN CYCLE
“door” APPEARS IN THE DISPLAY
“OFF” APPEARS IN THE DISPLAY
POSSIBLE CAUSE
●This is the function error code. Press the CLEAR/OFF pad. Allow oven to cool 1 hour. Place oven back into operation. If function error occurs again, disconnect power to the oven and call for service.
●The circuit breaker in your house has been tripped, or a fuse has been blown.
●Oven controls not properly set.
* Light bulb is loose or defective. Tighten or replace.
- Button oueratin% oven light is broken. Call for service.
●The oven controls are not properly set. See the Broiling section.
●The door not left open to the broil stop position as recommended.
●Improper shelf position being used.
●Food is being cooked on a hot pan.
s Cookware is not suited for broiling.
●Aluminum foil used on the broiler pan grid has not been fitted properly and slit as recommended.
●The oven controls are not properly set. See the Baking or Roasting section.
●Shelf position is not correct.
●Incorrect cookware of improper size is being used.
* A foil tent was not used when needed to slow down browning during roasting.
●The oven thermostat needs adjustment. See the Adjust the Oven Thermostat— Do It Yourself section.
●Temperature is too high to set
●Probe is in oven. Remove the probe.
Q Oven must COO1 below locking temperature.
*Oven controls not set properly. Review Operating the
●Heavy spillovers should be cleaned up before starting clean cycle.
●Oven door not closed after
●Door is still locked and you are trying to enter an oven cooking operation.
“Oven is too hot for
* Bake or Broil attempted too soon after
●Child Lockout feature turned on.
(continued next page)
37
