11
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
This feature can be used only at the end of a
timed baking cycle which has an automatic stop.
To activate this feature, follow the steps
below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the COOKING TIME pad. The
display will show Hld OFF.
Press the COOKING TIME pad again
to activate the feature. The display
will show Hld ON.
Press the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads
when setting a time or temperature, you may
notice the display changes slowly. This special
feature allows you to change the speed.
To set the speed you prefer, follow the
steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the INCREASE pad. The display
will show you a set speed between
1 and 5.
Press the INCREASE pad to increase
the speed up to the number 5.
Press the DECREASE pad to decrease
the speed down to the number 1.
Press START to activate the setting
and leave the control set in this
special features mode.