GE JVM140K operating instructions Questions? Use This Problem Solver

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM

OVEN WILL NOT COME ON

CONTROL PANEL

LIGHTED,YET OVEN WILL NOT START

"PROBE" APPEARS ON DISPLAY

FLOOR OF THE

OVEN IS WARM,

EVEN WHEN THE

OVEN HAS NOT

BEEN USED

POSSIBLE CAUSE

•A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or reset circuit breaker.

•Unplug your microwave oven, then plug it back in.

•Make sure 3-prong plug on oven is fully inserted into wall receptacle.

•Door not securely closed.

•START pad must be touched after entering cooking selection.

,Another selection entered already in oven and CLEANOFF pad not touched to cancel it.

,Make sure you have entered cooking time after touching TIME COOK I & II pad.

•CLEAR/OFF pad was touched accidentally. Reset cooking program and touch START pad.

•Make sure you have entered a temperature after touching TEMP COOK/HOLD pad.

•Make sure you have entered a code number after touching AUTO ROAST pad.

.Probe has been forgotten or not seated properly in oven wall when using Temp Cook/Hold or Auto Roast function.

•The cooktop lamp is located directly below the oven floor. When the lamp is on, the heat it produces makes the oven floor get warm. This is normal.

All these things are normal with your microwave oven:

•Steam or vapor escaping from around the door.

•Light reflection around door or outer case.

•Dimming oven light and change in blower sound may occur while operating at power levels other than high.

•Dull thumping sound while oven is operating.

•Some TV-Radio interference might be noticed while using your microwave oven. It's similar to the interference caused by other small appliances and does not indicate a problem with your oven.

If you need more help...cail, toll free: GE Answer Center"/800.626.2000/consumerinformation service

32