GE JVM150H warranty Automatic Roasti~, How to Auto Roast Beef to Mefim

Automatic Roasti~

Auto Roast uses the temperature probe to cook to the desired serving tem~rature. Unlike Temp Cook/Hold, which uses a single power level, Auto Roast

-up to 3 power settings which automatically switch during roasting, thus providing even, tender cooking resulk without overcooking.

Just as in conventional roasting, only tender roasts should be Auto Roasted until specified internal temperatures are reached. Less tender roasts should be microwaved by time, according to the cookbook

2. At 90°F., display switches to show meat’s internal temperature.

P‘lace pork roast in cooking bag and place in microwave-safe dish.

which comes with your oven.

=

, / I

Place meat in oven with probe to the right. Insert cable end of probe firmly into receptacle on oven wall.

How to Auto Roast

Beef to Mefim

3.mice during cooking program oven will signal and “TURn” will flash if codes 1 through 5 have been selected. Open the door and turn the meat over. The probe may be disconnected from the receptacle for easier turning of the me~t without interrup~ing the program. (Remember tore-insert the probe.)

Place tender beef roast in cooking bag on trivet in microwave-safe dish. (Refer to manufacturer’s instructions for proper use of cooking bag. ) Insert probe through cooking bag horizontally into the center meaty area not touching bone or fat. Make sure the handle does not touch the food or top or sides of the oven.

1.Touch AU~ ROAST pad. “AU~” appears on display and “ENTER CODE” flashes. Touch number pad 2. “CODE 2“ appears on display and “START” flashes. Touch START. Display shows temperature and “CODE 2:’

4.Close door and touch START. The temperature will return on display. Oven monitors internal food temperature; automatically switching to lower power as meat’s temperature rises. This helps prevent toughening or overcooking.

5.After fmd temperature is reached, oven switches to Hold temp for up to 1 hour, then shuts off.

24