GE JVM152J manual Automatic Roasting, ~pari~ Roask for Auto Roasti~, ROAST fi-ii,, \ 01 ?~

Automatic Roasting

Auto Roast uses the temperature probe to cook to the desired serving temperature. Unlike Temp Cook/Hold, which uses a single power level, Auto Roast uses up to 3 power settings which automatically switch during roasting, thus providing even, tender cooking results without overcooking.

Just as in conventional roasting, only tender roasts should be Auto Roasted until specified internal temperatures are reached. Less tender roasts should be microwaved by time, according to the cookbook which comes with your oven.

~pari~ Roask for Auto Roasti~

Place tender beef roast in cooking bag on trivet in microwave-safe dish. (Refer to package instructions for proper use of cooking bag.) Insert probe through cooking bag horizontally into the center meaty area not touching bone or fat. Make sure the handle does not touch the food or top or sides

of the oven.

Place pork roast in cooking bag and place in microwave-safe dish.

—

m @

]

\

—

Place meat in oven with probe to the right. Insert cable end of probe firmly into receptacle on oven wall.

How to Auto Roast Beef Roast to Medium

●

AUTO

ROAST fi-ii,,: \ 01 [ ?~,..

+..

; BEHIND DOOR :;’:;:=;; “:’?.

1.Touch AUTO ROAST pad. “ROAST” appears on the display and “ENTER CODE” flashes. Touch number pad 1. “l” and the selected doneness code—in this case, “M~’~ appear on the display. “CODE” flashes. After 4 seconds, “START” flashes on the display. Touch START. (See “Auto Roast Guide” on page 13 for complete list of recommended codes. )

Note: By touching the AU~ ROAST pad during cooking, the meat’s internal temperature will be displayed. (“COOL” will be displayed until meat reaches 90°F.) When pad is released, doneness code reappears on the display.

2.When you select Auto Roast codes 1 or 2, the oven signals with

4beeps and “TURn” flashes on the display when it’s time to turn the roast over. After you turn the roast, close the door and touch START. (Note: Oven continues to cook after the signal whether or not roast is turned over. )

3.After a pre-programmed food temperature is reached, oven beeps

4times and “HOLd” appears on the display.

4.Food will be held at this temperature for 60 minutes. The oven then beeps 4 times and “End” appears.

12