GE JVM152J “,,=, Auto Reheat, Foods Recommended, Foods Not Recommended, Easy to Use, Example

Auto Reheat

Auto Reheat lets you touch just 3 pads to bring previously prepared foods to serving temperature. With many leftovers, there is no need to Iook up reheating times in the cookbook or rely on guesswork.

By actually sensing the steam that escapes as food heats, this feature automatically adjusk the oven’s heating time to various types and amounk of pre-cooked food.

Because all cooking containers must be covered during automatic reheating, this feature is best with foods you want to steam or retain moisture.

Note:

Use of the metil shelf with Auto Reheat is N~ recommended.

Foods Recommended

A wide variety of previously cooked foods, including lefiovers. can be Auto Reheated. ~uto Reheat is recommended for single-servings of food. For reheating plates of leftovers, it is best to use Time Cook. See the cookbook.

Foods Not Recommended

1

Bread products, foods that must be reheated uncovered, foods that require constint attention and

foods calling for a dry look or crisp surface after reheating should not be Auto Reheated. It is best to Time Cook these foods.

Easy to Use

Simply touch three control pads— REHEAT, desired CODE and

START.

Keep Door Closed

Do not open the oven door while the words “ROOM T“ or “CHILL” are displayed—steam escaping from the oven can affect reheating performance. If the door is opened, close the door and touch the START pad immediately.

Auto Reheat Codes

Automatic Reheating codes 1 and 2 are designed to give easy, automatic reheating results with foods that are either c~illed in the refrigerator or are at room temperature.

CODE ~Foods at room temperature

CODE 2Foods at refrigerator temperature

Example:

I AUTOMATIC COO KINGI

AUTO *;;;*,,..

REHEAT :~~;,~-..

Q.....,“ ‘“ E

Place covered food in oven. Touch the REHEAT Dad.

“RHEAT” shows on display and “ENTER CODE” flashes.

14

❑::G

Touch number pad 1 or 2 for desired code. For example, touch number pad 2 to reheat food that is at refrigerator temperature.

Display shows “CHILL 2“ and “CODE” flashes.

QSTART ,~:::,=,.

“,,=):

After4 seconds, “START” flashes on the display. Touch the START pad.

“RHEAT” and “CODE 2“ are displayed.

Beep sounds when steam is sensed and “RHEAT” is replaced by cooking time counting down. Rotate or stir food, if necessary, Close the door and touch the START pad to finish heating. When done, display shows “End” and oven beeps every minute until the door is opened or the CLEAR/OFF pad is touched.