Side Stirrer Motor

Side Stirrer Motor

The side stirrer motor is located on the left side of the microwave oven.

Resistance through the side stirrer motor from the power cord (L) to CN04 pin 5 is approximately

6.7ohms. Isolated, the side stirrer motor is approximately 7.0 ohms. The door (primary interlock) must be closed to complete circuit. Check motor circuit for 21 VAC when operating.

Removal

Remove the microwave (see Microwave Removal and Component Access).

Disconnect the wire connector to the side stirrer motor. Remove the screw and turn the motor 1/8 turn CCW.

Note: When installing stirrer motor, be sure the locating pin is inserted in the motor mounting tab and the side stirrer is resting on the support in the cover prior to installing the screw.

Side Stirrer

Removal

Open the oven door. Pull the plastic rivet out of the stirrer cover. Rotate the stirrer cover CCW until it stops and remove the stirrer cover.

Rivet

Remove the stirrer.

Stirrer

Screw Side Stirrer

Disconnect

Note: When assembling, assure that the stirrer rides on the support in the cover.

– 10 –

Page 10
Image 10
GE JVM2070_H manual Side Stirrer Motor, Removal