Hidden Vent Motor
The hidden vent motor is located behind the hidden vent on the right side.
Resistance through the hidden vent motor from the CN03 pin 1 to the power cord (N) is approximately 28.8 ohms.
Removal
Note: This component may be able to be accessed without removing the microwave. If the 2 end screws on top of the outer cover are accessible, the hidden vent can be removed without removing the microwave from its installation.
Remove the hidden vent (see Microwave Removal and Component Access). Remove 2 screws and the motor.
Interior Light
Resistance through the interior light from the CN02 pin 7 to the power cord (L) is approximately 24.9 ohms.
Removal
Note: This component may be able to be accessed without removing the microwave. If the 2 end screws on top of the outer cover are accessible, the hidden vent can be removed without removing the microwave from its installation.
Remove the hidden vent (see Microwave Removal and Component Access). Press the tab with a small screwdriver and lift the interior light cover up and out.
Squeeze the 2 tabs of the light socket and remove the light assembly.
Note: When installing a new halogen bulb, be sure to handle the bulb with a clean, dry cloth.
Replace the halogen lamp with a 120VAC, 20W GE halogen lamp bulb (WB36X10213).
– 15 –
