ge.com
Control Lockout
Safety
Your control will allow you to lock out the touch pads so they cannot be activated when touched or cleaning the glass panel.
To lock the controls:
Touch the 9 and 0 touch pads at the same time for 3 seconds until the control beeps twice. The display will show LOC continuously and the time of day if not blacked out.
NOTE: All cooking and timing functions will be cancelled when locking out the control.
To unlock the control, touch the
9and 0 touch pads at the same time for 3 seconds until the control beeps twice, and LOC will be removed from the display.
NOTE: Some models have a Control Lockout pad. Touch and hold it for 3 seconds to lock/unlock.
Instructions Operating
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a
If you would prefer to have a
Touch the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.
Touch the Clock pad once. The display will show 12 hr. If this is the choice you want, touch the Start pad.
Touch the Clock pad again to change to the
Touch the Clock pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the Start pad.
NOTE: If the clock is in the
Instructions
Cook and Hold
Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.
This feature can only be used when timed cooking.
To activate this feature, follow the steps below.
Touch the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.
Touch the Cooking Time pad. The display will show Hld OFF.
Touch the Cooking Time pad again to activate the feature. The display will show Hld ON.
Touch the Start pad to activate the cook and hold feature and leave the control set in this special features mode.
Troubleshooting Tips Consumer Support
25
