GE PVM9195, PNM9196, JVM7195 To Remove the Charcoal Filter, To Install the Charcoal Filter

Models: DVM7195 JVM7196 JVM7195 PNM9196 PVM9195

1 60
Download 60 pages 56.51 Kb
Page 25
Image 25
Charcoal Filter

About the exhaust feature.

GEAppliances.com

Charcoal Filter

Sales No. JX81H

6HUYLFH1R:%;

The charcoal filter cannot be cleaned. It must

EHUHSODFHG2UGHU3DUW1R:%;IURP your GE supplier.

If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.

The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6 to 12 months, depending on usage). See “Optional Kits,” page 10, for more information.

Remove 2 grille screws to remove

the grille.

To Remove the Charcoal Filter

To remove the charcoal filter, first disconnect power at the main fuse or circuit breaker, or pull the plug. Remove the top grille by removing the two screws that hold it in place.

You may need to open the cabinet doors to remove the screws.

Lift the filter at the bottom until it comes free of the tabs. Slide the filter down and out.

To Install the Charcoal Filter

To install a new charcoal filter, remove plastic and other outer wrapping from the new filter.

Insert the top of the filter up and into the grooves on the inside of the top opening. Push the bottom of the filter in until it rests in place behind the tabs.

25

Page 25
Image 25
GE PVM9195, PNM9196, JVM7195 To Remove the Charcoal Filter, To Install the Charcoal Filter, About the exhaust feature