Registration

YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!

After the optional handset has charged for 16 hours on the extra charger,

HANDSET NEEDS REGISTRATION shows in the display.

1.Press the SELECT button. HOLD BASE PAGE WAIT FOR BEEP shows in the display. (Your handset should be held near the base during registration process.)

2.Press and hold the page button on the base unit until you hear a tone at the handset. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now name your handset.

Refer to section: "Handset Name."

Programming the Telephone

The handset menu gives you access to all of the built-in features. Press the MENU button to display the first menu PHONE BOOK, and press 6 and 5 buttons to navigate to the desired menu option. Press the SELECT button to activate a menu option. For details on programming, refer to the applicable section.

During programming, you may press the *EXIT button at any time to exit the menu and keep the previous setting.

PHONE BOOK

Enter and retrieve up to 50 names and

 

phone numbers, each can be assigned a

 

distinctive ringer tone and image.

ROOM MONITOR

Allows you to monitor any room in your

 

house with the accessory handsets.

INTERCOM

Talk between handsets or use to page

 

each other.

ANSWERER

Remotely access the answering system to

 

adjust the rings to answer, security code

 

and new message alert settings.

CALL RECORDS

Review Caller ID data; select and dial from

 

the Caller ID data or from the Redial list

 

which contains the last 3 phone numbers

 

dialed.

SOUND SETTING

Record ringer tone from microphone,

 

headset or any audio player; select main

 

ringer tone or set key tone.

10

Page 10
Image 10
GE TC28031 Series, TC28041 Series, 28011 manual Programming the Telephone, Registration