Storing the Last Number Dialed
Store a dialed number when reviewing it:
1.Make sure the phone is OFF (not in talk mode).
2.Press the REDIAL button on the handset to access the DIALED menu.
3.Use the 6 or 5 button to scroll to desired record.
4.Press SELECT button and the display shows STORE?.
5.Press SELECT button again to confirm and the display shows ENTER NAME.
6.Repeat Steps 6 through 13 in the section Adding Phone Book Entries, except instead of entering the number as indicated in Step 8, the dialed number shows on the display.
NOTE: If the phone book has 50 entries, FULL shows on the display and you must delete a record before adding a new one.
NOTE: If the dialed number is longer than 20 digits, it cannot be stored.
Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the #PAUSE button on the handset to insert a delay in dialing sequence of a stored number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the telephone number when adding a phone book entry.
Reviewing Phone Book Records
1.Make sure your phone is OFF (not in talk mode).
2.Press the MENU button and use the 6 or 5 button to scroll to PHONE BOOK.
3.Press the SELECT button to enter the phone book.
NOTE: You may press the PHONEBOOK button to shortcut to the phone book, too.
4.Use the 6 or 5 button to scroll the records
-OR -
Press the number keys to go to the name of the records started with the corresponding character.
NOTE: Your phone book records are sorted automatically in alphabetical order.
5.Press the SELECT button to view the details of the record.
6.Use the 6 or 5 button to view the picture ID set, if any.
29
