GE UV-1 Rear panel controls

2. General Description

Rear panel controls

6

11

9 Guide pin Screw 7 10 8

Fig. 4. Optical unit. Rear panel.

No.	Item	Description
6	Locking knob	The cell holder is in locked position when the locking
		knob is turned fully in the direction of the arrow
7	Filter inlet	Filters, converters or apertures are inserted in the
		positions indicated. When inserting them, align
8	Converter or	the arrowhead on the end of the filter or converter
		Aperturewith the arrowhead next to the appropriate
		opening. Filters, converters and apertures must be
		pressed fully
9	Support rod	Enables the optical unit to be mounted on laboratory
		scaffolding. The rod may be secured in either of two
		positions by a screw and a guide-pin
10	Support rod	Alternative position for support rod
11	Multi-core cable	Connects the optical unit to the control unit via
		an 11-pin plug with a snap-lock. For disconnection
		squeeze the ribbed sides of the plug firmly and pull

Warning: The optical unit contains a UV-source which is exposed if the cover is removed.

8