Installation
Washer
Instructions
If you have any questions, call 800.GE.carES (800.432.2737) orvisit our Website at: GEAppliances.com
BEFOrE yOU BEgIn
read these instructions completely and carefully.
•IMPOrtant –Save these instructions
for local inspector’s use.
•IMPOrtant –Observe all governing
codes and ordinances.
•note to Installer – Be sure to leave these
instructions with the Consumer.
•note to Consumer – Keep these instructions
for future reference.
• Skill level– Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time– 1-3 hours
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not
covered under the Warranty.
WarnIng
•This appliance must be properly grounded and
installed as described in these Installation Instructions.
•Do not install or store the appliance in an area where
it will be exposed to water/weather. See the Location
of Your Washer section.
• nOtE: this appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the national Electrical
Code, anSI/nFPa 70.
FOr yOUr SaFEty:
15
tOOLS rEQUIrED FOr
WaSHEr InStaLLatIOn
o1/4″nut driver
o3/8″socket with ratchet
o3/8″open-end wrench
oAdjustable wrench or 7/16″socket with ratchet
oAdjustable wrench or 9/16″open-end wrench
oChannel-lock adjustable pliers
oCarpenter’s level
oWater Hoses (2)
PartS SUPPLIED
oCable Tie
oHose Guide
StaCk BraCkEt kIt
A stack bracket kit is available at additional cost .
It can be ordered in the United States by visiting
our website at GEAppliances.com or calling
800.GE.CARES. Order kit #WE25X10018 or GEFLSTACK.