Installation Preparation

OUTDOOR GRILL, COOKTOP AND ACCESSORY CUTOUT DIMENSIONS

 

 

12" Min.

 

 

 

 

Separation

 

 

28-3/4" for 30" Models

 

Between Cutouts

 

 

40-3/4" for 42" Models

 

 

 

 

 

52-3/4" for 54" Models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11-7/8"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gas and Electrical Locations

 

 

 

 

 

24-1/2"

 

 

 

 

24-1/2"

 

Outdoor

 

 

 

24"

 

 

Cooktop

 

 

Trash Bin

 

 

 

 

 

 

 

 

ZGU122

10-7/8"

 

ZX18TC

 

 

 

Grill Cutout

 

 

2-Drawer

 

 

 

 

 

 

Storage

 

 

 

 

 

 

 

 

 

 

 

 

Non-Combustible

18-9/16"

ZX18DS

 

 

 

 

 

 

 

 

 

1-1/8"

Access Doors

18-1/4"

 

 

 

16"

36"

ZX27AD

*See Note.

 

 

 

 

Min.

 

 

 

17-1/4"

 

Min.

 

 

 

 

 

 

 

 

 

 

 

2-1/4" min.

24-1/8"*Note: When installing more than one accessory below the countertop, align the accessories across the bottom by adjusting the dimension above the floor. The cutouts must be offset depending on the product overlap below the cutout. Overlap for ZX27AD is 7/8", for ZX18DS is 1-1/4" and for ZX18TC is 1-3/16".

Gas and Electrical Locations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GAS LOCATION:

 

 

 

 

 

 

 

 

 

10" Min.

 

 

 

3-1/2"

 

 

 

 

 

 

 

 

 

Cut a 3-1/2" dia. hole for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the manifold connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-1/2"

 

 

 

 

 

 

 

 

 

 

as shown for LP tank

 

 

 

 

7-3/8"

 

 

 

 

 

 

 

 

 

or stationary gas line

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connections.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELECTRICAL LOCATION:

 

 

 

 

 

 

 

 

 

Cut a 1" dia. hole

 

 

2"

 

 

at the back left side

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

of the cutout.

 

 

 

 

 

3-1/2" Dia. Hole

3-1/2" Dia. Hole

 

for Stationary

 

for LP Tank Hose

 

 

 

Gas Line

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•If the countertop has an overhang, it must be notched or cut back flush with the front face of the cabinet below. This will allow the grill or side burner to fit flush at the front.

•The grill and outdoor cooktop drops into the opening and hangs from the side flanges. A deck is not required for support on the bottom.

•The construction must be level and stable and capable of supporting up to 400 lbs.

•The opening for the cooktop must be 24-1/2" deep from the front of the countertop. Cut a 1" dia. hole below the cooktop for the drain hose.

•Cut a 1" dia. hole at the back left side of the cutout for the grill’s electrical connection.

•A 120 volt outlet must be located within reach of the grill’s 6' power cord. The transformer bracket must be mounted within 3-1/2 feet of the outdoor grill.

•Maintain 12" separation between cutouts for an outdoor grill and an outdoor cooktop installation.

Countertop Notch Detail

to Depth

Face Cabinet

5/8" for Grills

9/16" for Outdoor Cooktop

Rotisserie

Connection

Non-Combustible

The grill rotisserie connection is on the left side near the front. Installation into a 24-1/2" front-to-back opening allows access to the rotisserie outlet.

11