Installation Instructions

ZX18TC TRASH BIN

 

• Cut the opening to the dimensions shown. Reinforce

 

the inside of the opening using at least 1" wide

16"

material surround to accept the frame-mounting

screws.

 

NOTE: If you are installing another accessory into

 

the same enclosure, measure and cut the openings

 

to accommodate the bottom overlaps and align

Mounting Screws (10)

them evenly across the bottom.

 

• Separate the mounting frame from the trash bin

 

door. Pull tab ends of the spring hinge pins outward

 

to disengage the bin.

 

• Insert the frame through the opening.

24"

• Install 10 screws (provided).

 

• Tilt the trash bin rear retaining lip into the frame first.

 

• Secure the trash bin to the frame by engaging the

 

spring hinge pins at the bottom.

 

Retaining Lip

Spring Hinge Clips (2)

 

 

26"

1-3/16" Drawer

Overlap

18" 12-1/2"

1" Thick

Door

22