ASSEMBLY TO ADVANTIUM 240V BUILT-IN SPEEDCOOK OVEN
1REMOVE PACKAGING AND PARTS
•Remove the drawer from the carton.
•Remove all packing material and tape.
•Open the drawer and remove any parts inside.
•Locate parts.
Side Supports (2)
Assembly
Instructions
Screws (2 Sets)
2 ASSEMBLING THE OVEN TO DRAWER
APlace storage drawer on a surface with the front of drawer hanging over the edge of the surface. Not placing the front edge of drawer over the edge of the surface may result in damage to the drawer since the front edge of drawer hangs below the bottom of drawer.
BPlace the oven on top of the storage drawer. Make sure that the back and sides of the oven align with the back and sides of drawer.
NOTE: The bottom of the oven side flanges will sit directly in front of the top of the storage drawer side flanges.
ASSEMBLING THE OVEN TO DRAWER (CONT.)
CRemove the front two bottom screws on each side of the oven and the top center screw on each side of the storage drawer.
DPlace the side supports into the tabs on the drawer and secure using the screws supplied and the screws removed in Step C.
EThe oven and storage drawer assembly is now ready to be installed. Return to the Advantium 240V
13
