Installation over a GE/Monogram Warming Drawer

Installation Preparation

Preparation WITH an Accessory Storage Drawer

NOTE: MODEL ZSC2202 CANNOT BE INSTALLED WITH AN ACCESSORY STORAGE DRAWER. SEE INSTALLATION PREPARATION WITHOUT AN ACCESSORY STORAGE DRAWER FOR THIS MODEL.

PREPARE THE OPENING

The Advantium 240V can be installed in combination with other GE/Monogram appliances. Always follow each product’s Installation Instructions to complete the installation.

Single Advantium 240V Installation:

Order a 30” wide single oven cabinet or cut the opening in a wall to the dimensions shown.

30”23-1/2”

25-1/4”

Min.*

PREPARE THE OPENING (CONT.)

Single Advantium 240V Installation (cont.)

When installed over a single oven or a warming drawer, allow at least 2” between the two openings. This separation will provide clearance for bottom overlap of the Advantium 240V and the other appliance overlaps.

Construct a solid oven floor of 3/8” min. thick plywood supported by 2 x 4 or 2 x 2 runners on all sides.

•The support must be level and rigidly mounted, flush with the bottom edge of the cutout.

Installation over a GE/Monogram

Warming Drawer:

	21”

		Construct
		Base
		Min. 3/8”
		Plywood
		Supported
		Supported
36-3/4”		by 2x4 or 2x2
Min.		Runners all
		Four Sides

*For existing cutouts, a maximum width of 28-1/2” is acceptable. If the opening is slightly wider, secure a furring strip on each side of the cutout for securing the oven.

30”23-1/2”

25-1/4”

Min.*

21”

36-3/4”

Min.

Construct Solid Bottom Min. 3/8” Plywood Supported by 2x4 or 2x2 Runners all Four Sides

2” Min.

(3” recommended)

Per warming drawer requirement

•Always maintain 36-3/4” minimum height from the floor to the cutout in any single or combined installation.

•Allow 3/4” to 2-1/8” case trim overlap on the sides and 7/8” overlap on the bottom of the opening for all models. The amount of overlap on the sides depends on the actual cutout width. Allow 1-1/4” case trim overlap on the top for models PSB2200 and PSB2201 and 3/4” overlap on the top for models ZSC2200, ZSC2201 and ZSC2202.

•Oven overlaps will conceal cut edges on all sides of the opening.

*For existing cutouts, a maximum width of 28-1/2” is acceptable. If the opening is slightly wider, secure a furring strip on each side of the cutout for securing the oven.

NOTE: Additional clearances between the cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details.

PSB2201, PSB2200, ZSC2202, ZSC2200, ZSC2201 specifications

The GE ZSC series, including models ZSC2201, ZSC2200, and ZSC2202, along with the PSB2200 and PSB2201, represents a significant advancement in the field of process automation and control. These devices are engineered to enhance industrial workflow efficiency through cutting-edge technology and user-centric design.

The ZSC2201, ZSC2200, and ZSC2202 are smart sensors that utilize advanced monitoring and diagnostic capabilities. They are equipped with high-fidelity sensing elements that allow for precise measurement and data acquisition. One notable feature is their ability to perform real-time monitoring of process variables, which supports proactive maintenance strategies and minimizes downtime. These models are designed with robust IP67-rated enclosures, making them suitable for harsh industrial environments while ensuring longevity and reliability.

In terms of communication, the ZSC series embraces modern protocols, including Modbus and EtherNet/IP, enabling seamless integration into existing automation systems. This interoperability facilitates the sharing of critical data across different platforms, ensuring that operators have access to real-time analytics and insights for informed decision-making.

On the other hand, the PSB2200 and PSB2201 are purpose-built for applications that require precision and reliability. These models feature enhanced signal processing algorithms, which improve accuracy in measurement and control tasks. The PSB series is particularly known for its energy efficiency and low power consumption, making them ideal for applications in remote or energy-sensitive locations.

Both PSB models also come equipped with user-friendly interfaces that simplify configuration and calibration processes. This ensures that operators can quickly adapt the devices to their specific workflow requirements without extensive training. Moreover, they support various input and output options, providing versatility in application scenarios.

The combination of innovative technology and user-oriented design in the GE ZSC and PSB series reflects GE’s commitment to enhancing industrial productivity and safety. As industries increasingly move towards digital transformation, these models are poised to play a crucial role in shaping the future of process automation and control systems. In summary, the GE ZSC2201, ZSC2200, ZSC2202, PSB2200, and PSB2201 exemplify the blend of reliability and advanced technology essential for modern industrial applications.

GE ZSC2202, ZSC2201, ZSC2200, PSB2200, PSB2201 Installation over a GE/Monogram Warming Drawer

Models: PSB2201 PSB2200 ZSC2202 ZSC2200 ZSC2201