Safety Information

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT Save these instructions for local inspector’s use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer Be sure to leave these instructions with the Consumer.

Note to Consumer Keep these instructions with your Owner’s Manual for future reference.

Skill Level Installation of this appliance requires basic mechanical and electrical skills.

Completion Time 1 Hour.

Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the warranty. See Owner’s Manual for warranty information.

IMPORTANT Use this oven only for its intended purpose. Never use the oven for warming or heating a room. Prolonged use of the oven without proper ventilation can be hazardous.

CAUTION:

For personal safety, remove house fuse or oven circuit breaker before beginning installation to avoid severe or fatal shock injury.

CAUTION:

For personal safety, the mounting surface must be capable of supporting the cabinet load, in addition to the added weight of the 80-pound oven and 30-pound drawer, plus additional oven loads of up to 50 pounds or a total weight of up to 160 pounds.

CAUTION:

For personal safety, this product cannot be installed in cabinet arrangements such as an island, a peninsula or below a countertop.

CONTENTS

 

Design Information

 

Models Available

2

Product Dimensions and Clearances

3

Tools and Parts Required

3

Parts Supplied

3

Electrical Tools and Parts Required

3

Advance Planning

3

Installation Preparation

 

Electrical Requirements

4

Install Junction Box

4

Preparing the Opening (Installation without

 

an accessory storage drawer)

5-6

Preparing the Opening (Installation with

 

an accessory storage drawer)

7-8

Installation Instructions

 

Step 1, Remove Packaging and Parts

9

Step 2, Route Conduit

10

Step 3, Install Bottom Trim

11

Step 4, Install Mounting Screws

11

Step 5, Finalize Installation

11

MODELS AVAILABLE

 

Profile Models:

 

PSB2200NWW–White

 

PSB2200NBB–Black

 

PSB2201NSS–Stainless Steel

 

Monogram Models:

 

ZSC2200NWW–White

 

ZSC2200NBB–Black

 

ZSC2201NSS–Stainless Steel

 

Monogram Pro Range Models:

 

ZSC2202NSS–Stainless Steel

 

NOTE: This unit cannot be installed with an

 

accessory storage drawer.

 

2

Page 2
Image 2
GE ZSC2202, ZSC2201, ZSC2200, PSB2200, PSB2201 installation instructions Contents, Models Available

PSB2201, PSB2200, ZSC2202, ZSC2200, ZSC2201 specifications

The GE ZSC series, including models ZSC2201, ZSC2200, and ZSC2202, along with the PSB2200 and PSB2201, represents a significant advancement in the field of process automation and control. These devices are engineered to enhance industrial workflow efficiency through cutting-edge technology and user-centric design.

The ZSC2201, ZSC2200, and ZSC2202 are smart sensors that utilize advanced monitoring and diagnostic capabilities. They are equipped with high-fidelity sensing elements that allow for precise measurement and data acquisition. One notable feature is their ability to perform real-time monitoring of process variables, which supports proactive maintenance strategies and minimizes downtime. These models are designed with robust IP67-rated enclosures, making them suitable for harsh industrial environments while ensuring longevity and reliability.

In terms of communication, the ZSC series embraces modern protocols, including Modbus and EtherNet/IP, enabling seamless integration into existing automation systems. This interoperability facilitates the sharing of critical data across different platforms, ensuring that operators have access to real-time analytics and insights for informed decision-making.

On the other hand, the PSB2200 and PSB2201 are purpose-built for applications that require precision and reliability. These models feature enhanced signal processing algorithms, which improve accuracy in measurement and control tasks. The PSB series is particularly known for its energy efficiency and low power consumption, making them ideal for applications in remote or energy-sensitive locations.

Both PSB models also come equipped with user-friendly interfaces that simplify configuration and calibration processes. This ensures that operators can quickly adapt the devices to their specific workflow requirements without extensive training. Moreover, they support various input and output options, providing versatility in application scenarios.

The combination of innovative technology and user-oriented design in the GE ZSC and PSB series reflects GE’s commitment to enhancing industrial productivity and safety. As industries increasingly move towards digital transformation, these models are poised to play a crucial role in shaping the future of process automation and control systems. In summary, the GE ZSC2201, ZSC2200, ZSC2202, PSB2200, and PSB2201 exemplify the blend of reliability and advanced technology essential for modern industrial applications.